home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1996 February
/
EnigmA AMIGA RUN 04 (1996)(G.R. Edizioni)(IT)[!][issue 1996-02][Skylink CD III].iso
/
earcd
/
faq
/
algorthm.lha
/
ALGORTHM.FAQ
next >
Wrap
Internet Message Format
|
1995-01-24
|
50KB
Path: bloom-beacon.mit.edu!hookup!nntp.cs.ubc.ca!scipio.cyberstore.ca!math.ohio-state.edu!howland.reston.ans.net!pipex!uunet!news.ingr.com!baggins.dazixco.ingr.com!destin!jdstone
From: jdstone@destin.dazixco.ingr.com (Jon Stone)
Newsgroups: comp.graphics.algorithms,comp.answers,news.answers
Subject: comp.graphics.algorithms Frequently Asked Questions (FAQ)
Supersedes: <graphics_779018404@baggins.dazixco.ingr.com>
Followup-To: comp.graphics.algorithms
Date: 9 Oct 1994 10:00:06 GMT
Organization: Intergraph Corp., Boulder CO
Lines: 1369
Approved: news-answers-request@MIT.EDU
Expires: 22 Nov 1994 10:00:03 GMT
Message-ID: <graphics_781696803@baggins.dazixco.ingr.com>
Reply-To: jdstone@ingr.com
NNTP-Posting-Host: destin.dazixco.ingr.com
Summary: This posting contains a list of Frequently Asked
Questions (and their answers) about computer graphics
algorithms. It should be read by anyone who wishes to
post to the comp.graphics.algorithms newsgroup.
Xref: bloom-beacon.mit.edu comp.graphics.algorithms:8978 comp.answers:7712 news.answers:27106
Archive-name: graphics/algorithms-faq
Version: 1.14
Last-Modified: September 29, 1994
Posting-Frequency: monthly
Welcome to the FAQ for comp.graphics.algorithms!
Thanks to all who have contributed. Corrections and contributions
always welcome.
Changed items are marked with a |.
New items are marked with a +.
Items needing input are marked with a ?.
All ftp references are of the form ftp://node/path
All Mosaic references are of the form http://node/path
----------------------------------------------------------------------
Table of Contents
----------------------------------------------------------------------
0) Charter of comp.graphics.algorithms
| 1) Are the postings to comp.graphics.algorithms archived?
2) What are some must have books on graphics algorithms?
3) Are there any online references?
4) Where is all the source?
5) How do I rotate a 2D point?
6) How do I rotate a 3D point?
7) How do I find the distance from a point to a line?
8) How do I find intersections of 2 2D line segments?
9) How do I find the intersection of a line and a plane?
10) How do I rotate a bitmap?
11) How do I display a 24 bit image in 8 bits?
12) How do I fill the area an arbitrary shape?
13) How do I find the 'edges' in a bitmap?
? 14) How do I enlarge/sharpen/fuzz a bitmap?
15) How do I map a texture on to a shape?
16) How do I find the area/orientation of a polygon?
17) How do I find if a point lies within a polygon?
? 18) How do I find the intersection of two convex polygons?
19) How do I detect a 'corner' in a collection of points?
20) How do I generate a circle through three points?
21) How do I generate a bezier curve that is parallel to another bezier?
22) How do I split a bezier at a specific value for t?
23) How do I find a t value at a specific point on a bezier?
24) How do I fit a bezier curve to a circle?
25) What is ARCBALL?
26) Where can I find ARCBALL source?
27) How do I clip a polygon against a rectangle?
28) How do I clip a polygon against another polygon?
? 29) Where can I get source for Weiler/Atherton clipping?
? 30) How do I generate a spline to approximate (insert curve here)?
? 31) Where do I get source to display (raster font format)?
? 32) What is morphing/how is it done?
? 33) How do I draw an anti-aliased line/polygon/ellipse?
34) How do I determine the intersection between a ray and a polygon?
35) How do I determine the intersection between a ray and a sphere?
36) How do I determine the intersection between a ray and a bezier surface?
37) How do I ray trace caustics?
38) How do I quickly draw a filled triangle?
39) Where can I get source for Voronoi/Delaunay triangulation?
40) Where do I get source for convex hull?
41) What is the marching cubes algorithm?
? 42) What is the status of the patent on the "marching cubes" algorithm?
43) How do I do a hidden surface test (backface culling) with 3d points?
44) How do I do a hidden surface test (backface culling) with 2d points?
45) Where can I find graph layout algorithms?
? 46) Where can I find algorithms for 2D collision detection?
47) Where can I find algorithms for 3D collision detection?
48) 3D Noise functions and turbulence in Solid texturing.
49) How do I perform basic viewing in 3d?
? 50) How can you contribute to this FAQ?
51) Contributors. Who made this all possible.
----------------------------------------------------------------------
Subject: 0) Charter of comp.graphics.algorithms
Comp.graphics.algorithms is an unmoderated newsgroup intended
as a forum for the discussion of the algorithms used in the
process of generating computer graphics. These algorithms may
be recently proposed in published journals or papers, old or
previously known algorithms, or hacks used incidental to the
process of computer graphics. The scope of these algorithms
may range from an efficient way to multiply matrices, all the
way to a global illumination method incorporating ray tracing,
radiosity, infinite spectrum modeling, and perhaps even
mirrored balls and lime jello.
It is hoped that this group will serve as a forum for programmers
and researchers to exchange ideas and ask questions on recent
papers or current research related to computer graphics.
comp.graphics.algorithms is not:
- for requests for gifs, or other pictures
- for requests for image translator software (i.e. gif <--> jpg)
----------------------------------------------------------------------
Subject: 1) Are the postings to comp.graphics.algorithms archived?
| Yes. The "official" archive is stored at:
|
| http://www.cis.ohio-state/hypertext/faq/usenet/graphics/algorithms-faq/faq.html
| ftp://rtfm.mit.edu/pub/usenet-by-group/news.answers/graphics/algorithms-faq
|
| Also available at:
|
| ftp://wuarchive.wustl.edu/graphics/graphics/mail-lists/comp.graphics.algorithms
It is archived in the same manner that all other newsgroups are
being archived there, namely there is an Index file with all the
subjects, and all the articles are being kept in a hierarchy based
on the year and month they are posted.
| FYI, all usenet FAQ's are available with Mosaic via
|
| http://www.cis.ohio-state/hypertext/faq/usenet/top.html
----------------------------------------------------------------------
Subject: 2) What are some must have books on graphics algorithms?
The keywords in brackets are used to refer to the books in later
questions. They generally refer to the first author except where
it is necessary to resolve ambiguity or in the case of the Gems.
Basic computer graphics, rendering algorithms,
----------------------------------------------
[Foley]
Computer Graphics: Principles and Practice (2nd Ed.),
J.D. Foley, A. van Dam, S.K. Feiner, J.F. Hughes, Addison-Wesley
1990, ISBN 0-201-12110-7
[Rogers:Procedural]
Procedural Elements for Computer Graphics,
David F. Rogers, McGraw Hill 1985, ISBN 0-07-053534-5
[Rogers:Mathematical]
Mathematical Elements for Computer Graphics 2nd Ed.,
David F. Rogers and J. Alan Adams, McGraw Hill 1990, ISBN
0-07-053530-2
[Watt:3D]
_3D Computer Graphics, 2nd Edition_,
Alan Watt, Addison-Wesley 1993, ISBN 0-201-63186-5
[Glassner:RayTracing]
An Introduction to Ray Tracing,
Andrew Glassner (ed.), Academic Press 1989, ISBN 0-12-286160-4
[Gems I]
Graphics Gems,
Andrew Glassner (ed.), Academic Press 1990, ISBN 0-12-286165-5
[Gems II]
Graphics Gems II,
James Arvo (ed.), Academic Press 1991, ISBN 0-12-64480-0
[Gems III]
Graphics Gems III,
David Kirk (ed.), Academic Press 1992, ISBN 0-12-409670-0 (with
IBM disk) or 0-12-409671-9 (with Mac disk)
[Gems IV]
Graphics Gems IV,
Paul S. Heckbert (ed.), Academic Press 1994, ISBN 0-12-336155-9
(with IBM disk) or 0-12-336156-7 (with Mac disk)
[Watt:Animation]
Advanced Animation and Rendering Techniques,
Alan Watt, Mark Watt, Addison-Wesley 1992, ISBN 0-201-54412-1
[Bartels]
An Introduction to Splines for Use in Computer Graphics and
Geometric Modeling,
Richard H. Bartels, John C. Beatty, Brian A. Barsky, 1987, ISBN
0-934613-27-3
[Farin]
Curves and Surfaces for Computer Aided Geometric Design:
A Practical Guide, 3rd Edition, Gerald E. Farin, Academic Press
1993. ISBN 0-12-249052-5
[Prusinkiewicz]
The Algorithmic Beauty of Plants,
Przemyslaw W. Prusinkiewicz, Aristid Lindenmayer, Springer-Verlag,
1990, ISBN 0-387-97297-8, ISBN 3-540-97297-8
[Oliver]
Tricks of the Graphics Gurus,
Dick Oliver, et al. (2) 3.5 PC disks included, $39.95 SAMS Publishing
[Hearn]
Introduction to computer graphics,
Hearn & Baker
For image processing,
---------------------
[Barnsley]
Fractal Image Compression,
Michael F. Barnsley and Lyman P. Hurd, AK Peters, Ltd, 1993 ISBN
1-56881-000-8
[Jain]
Fundamentals of Image Processing,
Anil K. Jain, Prentice-Hall 1989, ISBN 0-13-336165-9
[Castleman]
Digital Image Processing,
Kenneth R. Castleman, Prentice-Hall 1979, ISBN 0-13-212365-7
[Pratt]
Digital Image Processing, Second Edition,
William K. Pratt, Wiley-Interscience 1991, ISBN 0-471-85766-1
[Gonzalez]
Digital Image Processing (2nd Ed.),
Rafael C. Gonzalez, Paul Wintz, Addison-Wesley 1987, ISBN
0-201-11026-1
[Russ]
The Image Processing Handbook,
John C. Russ, CRC Press 1992, ISBN 0-8493-4233-3
[Wolberg]
Digital Image Warping,
George Wolberg, IEEE Computer Society Press Monograph 1990, ISBN
0-8186-8944-7
Computational geometry,
----------------------
[Bowyer]
A Programmer's Geometry,
Adrian Bowyer, John Woodwark, Butterworths 1983, ISBN
0-408-01242-0 Pbk
[O' Rourke]
Computational Geometry in C,
Joseph O'Rourke, Cambridge University Press 1994, ISBN
0-521-44592-2 Pbk, ISBN 0-521-44034-3 Hdbk
[Mortenson]
Geometric Modeling,
Michael E. Mortenson, Wiley 1985, ISBN 0-471-88279-8
[Preparata]
Computational Geometry: An Introduction,
Franco P. Preparata, Michael Ian Shamos, Springer-Verlag 1985,
ISBN 0-387-96131-3
----------------------------------------------------------------------
Subject: 3) Are there any online references?
The computational geometry community maintains its own
bibliography of publications in or closely related to that
subject. Every four months, additions and corrections are
solicited from users, after which the database is updated and
released anew. As of September 1993, it contained 5356 bib-tex
entries. It can be retrieved from
ftp://cs.usask.ca/pub/geometry/geombib.tar.Z - bibliography proper
ftp://cs.usask.ca/pub/geometry/geom.ps.Z - PostScript format
ftp://cs.usask.ca/pub/geometry/o-cgc19.ps.Z - overview published
in '93 in SIGACT News and the Internat. J. Comput. Geom. Appl.
ftp://cs.usask.ca/pub/geometry/ftp-hints - detailed retrieval info
Announcing the ACM SIGGRAPH Online Bibliography Project, by
Stephen Spencer (biblio@siggraph.org)
The database is available for anonymous FTP from the
ftp://siggraph.org/publications/bibliography directory. Please
download and examine the file READ_ME in that directory for more
specific information concerning the database.
'netlib' is a useful source for algorithms, member inquiries for
SIAM, and bibliographic searches. For information, send mail to
netlib@ornl.gov, with "send index" in the body of the mail
message.
You can also find free sources for numerical computation in C via
ftp://usc.edu/pub/C-numanal. In particular, grab
numcomp-free-c.gz in that directory.
Check out Nick Fotis's computer graphics resources FAQ -- it's
packed with pointers to all sorts of great computer graphics
stuff. This FAQ is posted biweekly to comp.graphics.
----------------------------------------------------------------------
Subject: 4) Where is all the source?
Graphics Gems source code.
ftp://princeton.edu:pub/Graphics/GraphicsGems
General 'stuff'
ftp://wuarchive.wustl.edu/graphics/graphics
----------------------------------------------------------------------
Subject: 5) How do I rotate a 2D point?
In 2-D, the 2x2 matrix is very simple. If you want to rotate a
column vector v by t degrees using matrix M, use
M = {{cos t, -sin t}, {sin t, cos t}} in M*v.
If you have a row vector, use the transpose of M (turn rows into
columns and vice versa). If you want to combine rotations, in 2-D
you can just add their angles, but in higher dimensions you must
multiply their matrices.
----------------------------------------------------------------------
Subject: 6) How do I rotate a 3D point?
Assuming you want to rotate vectors around the origin of your
coordinate system. (If you want to rotate around some other point,
subtract its coordinates from the point you are rotating, do the
rotation, and then add back what you subtracted.) In 3-D, you need
not only an angle, but also an axis. (In higher dimensions it gets
much worse, very quickly.) Actually, you need 3 independent
numbers, and these come in a variety of flavors. The flavor I
recommend is unit quaternions: 4 numbers that square and add up to
+1. You can write these as [(x,y,z),w], with 4 real numbers, or
[v,w], with v, a 3-D vector pointing along the axis. The concept
of an axis is unique to 3-D. It is a line through the origin
containing all the points which do not move during the rotation.
So we know if we are turning forwards or back, we use a vector
pointing out along the line. Suppose you want to use unit vector u
as your axis, and rotate by 2t degrees. (Yes, that's twice t.)
Make a quaternion [u sin t, cos t]. You can use the quaternion --
call it q -- directly on a vector v with quaternion
multiplication, q v q^-1, or just convert the quaternion to a 3x3
matrix M. If the components of q are {(x,y,z),w], then you want
the matrix
M = {{1-2(yy+zz), 2(xy-wz), 2(xz+wy)},
{ 2(xy+wz),1-2(xx+zz), 2(yz-wx)},
{ 2(xz-wy), 2(yz+wx),1-2(xx+yy)}}.
Rotations, translations, and much more are explained in all basic
computer graphics texts. Quaternions are covered briefly in
[Foley], and more extensively in several Graphics Gems, and the
SIGGRAPH 85 proceedings.
----------------------------------------------------------------------
Subject: 7) How do I find the distance from a point to a line?
Let the point be C (XC,YC) and the line be AB (XA,YA) to (XB,YB).
The length of the line segment AB is L:
L=((XB-XA)**2+(YB-YA)**2)**0.5
and
(YA-YC)(YA-YB)-(XA-XC)(XB-XA)
r = -----------------------------
L**2
(YA-YC)(XB-XA)-(XA-XC)(YB-YA)
s = -----------------------------
L**2
Let I be the point of perpendicular projection of C onto AB, the
XI=XA+r(XB-XA)
YI=YA+r(YB-YA)
Distance from A to I = r*L
Distance from C to I = s*L
If r<0 I is on backward extension of AB
If r>1 I is on ahead extension of AB
If 0<=r<=1 I is on AB
If s<0 C is left of AB (you can just check the numerator)
If s>0 C is right of AB
If s=0 C is on AB
----------------------------------------------------------------------
Subject: 8) How do I find intersections of 2 2D line segments?
This problem can be extremely easy or extremely difficult depends
on your applications. If all you want is the intersection point,
the following should work:
Let A,B,C,D be 2-space position vectors. Then the directed line
segments AB & CD are given by:
AB=A+r(B-A), r in [0,1]
CD=C+s(D-C), s in [0,1]
If AB & CD intersect, then
A+r(B-A)=C+s(D-C), or
XA+r(XB-XA)=XC+s(XD-XC)
YA+r(YB-YA)=YC+s(YD-YC) for some r,s in [0,1]
Solving the above for r and s yields
(YA-YC)(XD-XC)-(XA-XC)(YD-YC)
r = ----------------------------- (eqn 1)
(XB-XA)(YD-YC)-(YB-YA)(XD-XC)
(YA-YC)(XB-XA)-(XA-XC)(YB-YA)
s = ----------------------------- (eqn 2)
(XB-XA)(YD-YC)-(YB-YA)(XD-XC)
Let I be the position vector of the intersection point, then
I=A+r(B-A) or
XI=XA+r(XB-XA)
YI=YA+r(YB-YA)
By examining the values of r & s, you can also determine some
other limiting conditions:
If 0<=r<=1 & 0<=s<=1, intersection exists
r<0 or r>1 or s<0 or s>1 line segments do not intersect
If the denominator in eqn 1 is zero, AB & CD are parallel
If the numerator in eqn 1 is also zero, AB & CD are coincident
If the intersection point of the 2 lines are needed (lines in this
context mean infinite lines) regardless whether the two line
segments intersect, then
If r>1, I is located on extension of AB
If r<0, I is located on extension of BA
If s>1, I is located on extension of CD
If s<0, I is located on extension of DC
Also note that the denominators of eqn 1 & 2 are identical.
References:
[O'Rourke] pp. 249-51
[Gems III] pp. 199-202 "Faster Line Segment Intersection,"
----------------------------------------------------------------------
Subject: 9) How do I find the intersection of a line and a plane?
If the plane is defined as:
a*x + b*y + c*z + d = 0
and the line is defined as:
x = x1 + (x2 - x1)*t = x1 + i*t
y = y1 + (y2 - y1)*t = y1 + j*t
z = z1 + (z2 - z1)*t = z1 + k*t
Then just substitute these into the plane equation. You end up
with:
t = - (a*x1 + b*y1 + c*z1 + d)/(a*i + b*j + c*k)
If the denominator is zero, then the vector (a,b,c) and the vector
(i,j,k) are perpendicular. Note that (a,b,c) is the normal to the
plane and (i,j,k) is the direction of the line. It follows that
the line is either parallel to the plane or contained in the
plane. In either case there is no unique intersection point.
----------------------------------------------------------------------
Subject: 10) How do I rotate a bitmap?
The easiest way, according to the comp.graphics faq, is to take
the rotation transformation and invert it. Then you just iterate
over the destination image, apply this inverse transformation and
find which source pixel to copy there.
A much nicer way comes from the observation that the rotation
matrix:
R(T) = { { cos(T), -sin(T) }, { sin(T), cos(T) } }
is formed my multiplying three matrices, namely:
R(T) = M1(T) * M2(T) * M3(T)
where
M1(T) = { { 1, -tan(T/2) },
{ 0, 1 } }
M2(T) = { { 1, 0 },
{ sin(T), 1 } }
M3(T) = { { 1, -tan(T/2) },
{ 0, 1 } }
Each transformation can be performed in a separate pass, and
because these transformations are either row-preserving or
column-preserving, anti-aliasing is quite easy.
Reference:
Paeth, A. W., "A Fast Algorithm for General Raster Rotation",
Proceedings Graphics Interface '89, Canadian Information
Processing Society, 1986, 77-81
[Note - e-mail copies of this paper are no longer available]
[Gems I]
----------------------------------------------------------------------
Subject: 11) How do I display a 24 bit image in 8 bits?
[Gems I] pp. 287-293, "A Simple Method for Color Quantization:
Octree Quantization"
B. Kurz. Optimal Color Quantization for Color Displays.
Proceedings of the IEEE Conference on Computer Vision and Pattern
Recognition, 1983, pp. 217-224.
[Gems II] pp. 116-125, "Efficient Inverse Color Map Computation"
This describes an efficient technique to
map actual colors to a reduced color map,
selected by some other technique described
in the other papers.
[Gems II] pp. 126-133, "Efficient Statistical Computations for
Optimal Color Quantization"
Xiaolin Wu. Color Quantization by Dynamic Programming and
Principal Analysis. ACM Transactions on Graphics, Vol. 11, No. 4,
October 1992, pp 348-372.
----------------------------------------------------------------------
Subject: 12) How do I fill the area of an arbitrary shape?
"A Fast Algorithm for the Restoration of Images Based on Chain
Codes Description and Its Applications", L.W. Chang & K.L. Leu,
Computer Vision, Graphics, and Image Processing, vol.50,
pp296-307 (1990)
"An Introductory Course in Computer Graphics" by Richard Kingslake,
(2nd edition) published by Chartwell-Bratt ISBN 0-86238-284-X
[Gems I]
[Foley]
[Hearn]
----------------------------------------------------------------------
Subject: 13) How do I find the 'edges' in a bitmap?
A simple method is to put the bitmap through the filter:
-1 -1 -1
-1 8 -1
-1 -1 -1
This will highlight changes in contrast. Then any part of the
picture where the absolute filtered value is higher than some
threshold is an "edge".
----------------------------------------------------------------------
Subject: 14) How do I enlarge/sharpen/fuzz a bitmap?
----------------------------------------------------------------------
Subject: 15) How do I map a texture on to a shape?
Paul S. Heckbert, "Survey of Texture Mapping", IEEE Computer
Graphics and Applications V6, #11, Nov. 1986, pp 56-67 revised
from Graphics Interface '86 version
Eric A. Bier and Kenneth R. Sloan, Jr., "Two-Part Texture
Mappings", IEEE Computer Graphics and Applications V6 #9, Sept.
1986, pp 40-53 (projection parameterizations)
----------------------------------------------------------------------
Subject: 16) How do I find the area/orientation of a polygon?
Compute the signed area. The orientation is counter-clockwise if
this area is positive. There's a Gem on computing signed areas.
A slightly faster method is based on the observation that it isn't
necessary to compute the area. One can find the lowest, rightmost
point of the polygon, and then take the cross product of the edges
fore and aft of it. Both methods are O(n) for n vertices, but it
does seem a waste to add up the total area when a single cross
product (of just the right edges) suffices.
The reason that the lowest, rightmost point works is that the
internal angle at this vertex is necessarily convex, strictly less
than pi (even if there are several equally-lowest points).
The key formula is this:
If the coordinates of vertex v_i are x_i and y_i,
twice the area of a polygon is given by
2 A( P ) = sum_{i=0}^{n-1} (x_i y_{i+1} - y_i x_{i+1}).
Reference:
[O' Rourke] pp. 18-27.
----------------------------------------------------------------------
Subject: 17) How do I find if a point lies within a polygon?
A quick comment - the code in the Sedgewick book Algorithms is
wrong.
The short answer, for the FAQ, could be:
int pnpoly(int npol, float *xp, float *yp, float x, float y)
{
int i, j, c = 0;
for (i = 0, j = npol-1; i < npol; j = i++) {
if ((((yp[i]<=y) && (y<yp[j])) ||
((yp[j]<=y) && (y<yp[i]))) &&
(x < (xp[j] - xp[i]) * (y - yp[i]) / (yp[j] - yp[i]) + xp[i]))
c = !c;
}
return c;
}
This code is from Wm. Randolph Franklin, wrf@ecse.rpi.edu, a
professor at RPI, with some minor modifications for speed by me.
A good reference for this problem will be:
References:
[O'Rourke] pp. 233-238
[Gems IV] pp. 23-45
[Glassner:RayTracing]
----------------------------------------------------------------------
Subject: 18) How do I find the intersection of two convex polygons?
[O'Rourke] pp. 242-252
----------------------------------------------------------------------
Subject: 19) How do I detect a 'corner' in a collection of points?
For the general solution to the problem get Ata Etemadi's software
package and associated papers from one of the addresses below.
It's very fast and detects polygons too.
ftp://peipa.essex.ac.uk/ipa/src/process
ftp://ftp.teleos.com/VISION-LIST-ARCHIVE/SHAREWARE
----------------------------------------------------------------------
Subject: 20) How do I generate a circle through three points?
Let the three given points be a, b, c. Use _0 and _1 to represent
x and y coordinates. The coordinates of the center p=(p_0,p_1) of
the circle determined by a, b, and c are:
p_0 =
( b_1 a_0^2
- c_1 a_0^2
- b_1^2 a_1
+ c_1^2 a_1
+ b_0^2 c_1
+ a_1^2 b_1
+ c_0^2 a_1
- c_1^2 b_1
- c_0^2 b_1
- b_0^2 a_1
+ b_1^2 c_1
- a_1^2 c_1 )
/ D
p_1 =
( a_0^2 c_0
+ a_1^2 c_0
+ b_0^2 a_0
- b_0^2 c_0
+ b_1^2 a_0
- b_1^2 c_0
- a_0^2 b_0
- a_1^2 b_0
- c_0^2 a_0
+ c_0^2 b_0
- c_1^2 a_0
+ c_1^2 b_0)
/ D
where
D = 2( a_1 c_0 + b_1 a_0 - b_1 c_0 -a_1 b_0 -c_1 a_0 + c_1 b_0 )
The radius of the circle is then:
r^2 = (a_0 - p_0)^2 + (a_1 - p_1)^2
Reference:
[O' Rourke] p. 201
----------------------------------------------------------------------
Subject: 21) How do I generate a bezier curve that is parallel to another bezier?
You can't. The only case where this is possible is when the
bezier can be represented by a straight line. And then the
parallel 'bezier' can also be represented by a straight line.
----------------------------------------------------------------------
Subject: 22) How do I split a bezier at a specific value for t?
A Bezier curve is a parametric polynomial function from the
interval [0..1] to a space, usually 2-D or 3-D. Common Bezier
curves use cubic polynomials, so have the form
f(t) = a3 t^3 + a2 t^2 + a1 t + a0,
where the coefficients are points in 3-D. Blossoming converts this
polynomial to a more helpful form. Let s = 1-t, and think of
tri-linear interpolation:
F([s0,t0],[s1,t1],[s2,t2]) =
s0(s1(s2 c30 + t2 c21) + t1(s2 c21 + t2 c12)) +
t0(s1(s2 c21 + t2 c12) + t1(s2 c12 + t2 c03))
=
c30(s0 s1 s2) +
c21(s0 s1 t2 + s0 t1 s2 + t0 s1 s2) +
c12(s0 t1 t2 + t0 s1 t2 + t0 t1 s2) +
c03(t0 t1 t2).
The data points c30, c21, c12, and c03 have been used in such a
way as to make the resulting function give the same value if any
two arguments, say [s0,t0] and [s2,t2], are swapped. When [1-t,t]
is used for all three arguments, the result is the cubic Bezier
curve with those data points controlling it:
f(t) = F([1-t,t],[1-t,t],[1-t,t])
= (1-t)^3 c30 +
3(1-t)^2 t c21 +
3(1-t) t^2 c12 +
t^3 c03.
Notice that
F([1,0],[1,0],[1,0]) = c30,
F([1,0],[1,0],[0,1]) = c21,
F([1,0],[0,1],[0,1]) = c12, _
F([0,1],[0,1],[0,1]) = c03.
In other words, cij is obtained by giving F argument t's i of
which are 0 and j of which are 1. Since F is a linear polynomial
in each argument, we can find f(t) using a series of simple steps.
Begin with
f000 = c30, f001 = c21, f011 = c12, f111 = c03.
Then compute in succession:
f00t = s f000 + t f001, f01t = s f001 + t f011,
f11t = s f011 + t f111,
f0tt = s f00t + t f01t, f1tt = s f01t + t f11t,
fttt = s f0tt + t f1tt.
This is the de Casteljau algorithm for computing f(t) = fttt.
It also has split the curve for the intervals [0..t] and [t..1].
The control points for the first interval are f000, f00t, f0tt,
fttt, while those for the second interval are fttt, f1tt, f11t,
f111.
If you evaluate 3 F([1-t,t],[1-t,t],[-1,1]) you will get the
derivate of f at t. Similarly, 2*3 F([1-t,t],[-1,1],[-1,1]) gives
the second derivative of f at t, and finally using 1*2*3
F([-1,1],[-1,1],[-1,1]) gives the third derivative.
This procedure is easily generalized to different degrees,
triangular patches, and B-spline curves.
----------------------------------------------------------------------
Subject: 23) How do I find a t value at a specific point on a bezier?
In general, you'll need to find t closest to your search point.
There are a number of ways you can do this. Look at [Gems I, 607],
there's a chapter on finding the nearest point on the bezier
curve. In my experience, digitizing the bezier curve is an
acceptable method. You can also try recursively subdividing the
curve, see if you point is in the convex hull of the control
points, and checking is the control points are close enough to a
linear line segment and find the nearest point on the line
segment, using linear interpolation and keeping track of the
subdivision level, you'll be able to find t.
----------------------------------------------------------------------
Subject: 24) How do I fit a bezier curve to a circle?
Interestingly enough, bezier curves can approximate a circle but
not perfectly fit a circle.
Michael Goldapp, "Approximation of circular arcs by cubic
polynomials" Computer Aided Geometric Design (#8 1991 pp.227-238)
Tor Dokken and Morten Daehlen, "Good Approximations of circles by
curvature-continuous Bezier curves" Computer Aided Geometric
Design (#7 1990 pp. 33-41).
----------------------------------------------------------------------
Subject: 25) What is ARCBALL?
Arcball is a general purpose 3-D rotation controller described by
Ken Shoemake in the Graphics Interface '92 Proceedings. It
features good behavior, easy implementation, cheap execution, and
optional axis constraints. A Macintosh demo and electronic version
of the original paper (Microsoft Word format) may be obtained from
ftp::/ftp.cis.upenn.edu/pub/graphics.
----------------------------------------------------------------------
Subject: 26) Where can I find ARCBALL source?
Complete source code appears in Graphics Gems IV pp. 175-192. A
fairly complete sketch of the code appeared in the original
article, in Graphics Interface 92 Proceedings, available from
Morgan Kaufmann.
----------------------------------------------------------------------
Subject: 27) How do I clip a polygon against a rectangle?
This is the Sutherland-Hodgman algorithm, an old favorite that
should be covered in any textbook. Any of the references listed in
the FAQ should have it. According to Vatti (q.v.) "This
[algorithm] produces degenerate edges in certain concave / self
intersecting polygons that need to be removed as a special
extension to the main algorithm" (though this is not a problem if
all you are doing with the results is scan converting them.)
----------------------------------------------------------------------
Subject: 28) How do I clip a polygon against another polygon?
People interested in some alpha state code, written in C++ with
templates (for example: g++) can contact Klamer Schutte,
klamer@mi.el.utwente.nl. Or with Mosaic, at
http://ph.tn.tudelft.nl:2000/People/klamer/Klamer.html#clippoly.
Also from ftp://galaxy.ph.tn.tudelft.nl/pub/klamer/clippoly.tar.gz
----------------------------------------------------------------------
Subject: 29) Where can I get source for Weiler/Atherton clipping?
----------------------------------------------------------------------
Subject: 30) How do I generate a spline to approximate (insert curve here)?
----------------------------------------------------------------------
Subject: 31) Where do I get source to display (raster font format)?
----------------------------------------------------------------------
Subject: 32) What is morphing/how is it done?
----------------------------------------------------------------------
Subject: 33)How do I draw an anti-aliased line/polygon/ellipse?
----------------------------------------------------------------------
Subject: 34) How do I determine the intersection between a ray and a polygon
First find the intersection between the ray and the plane in which
the polygon is situated. Then see if the point of intersection is
in the polygon.
Reference:
[Glassner:RayTracing]
----------------------------------------------------------------------
Subject: 35) How do I determine the intersection between a ray and a sphere
Given a ray defined as:
x = x1 + (x2 - x1)*t = x1 + i*t
y = y1 + (y2 - y1)*t = y1 + j*t
z = z1 + (z2 - z1)*t = z1 + k*t
and a sphere defined as:
(x - l)**2 + (y - m)**2 + (z - n)**2 = r**2
Substituting in gives the quadratic equation:
a*t**2 + b*t + c = 0
where:
a = i**2 + j**2 + k**2
b = 2*i*(x1 - l) + 2*j*(y1 - m) + 2*k*(x1 - n)
c = l**2 + m**2 + n**2 + x1**2 + y1**2 + z1**2
- 2*(l*x1 + m*y1 + n*z1) - r**2
If the determinant of this equation is less than 0, the line does
not intersect the sphere. If it is zero, the line is tangential to
the sphere and if it is greater than zero it intersects at two
points. Solving the equation and substituting the values of t into
the ray equation will give you the points.
Reference:
[Glassner:RayTracing]
----------------------------------------------------------------------
Subject: 36) How do I determine the intersection between a ray and a bezier
surface?
Joy I.K. and Bhetanabhotla M.N., "Ray tracing parametric surfaces
utilizing numeric techniques and ray coherence", Computer
Graphics, 16, 1986, 279-286
Joy and Bhetanabhotla is only one approach of three major method
classes: tessellation, direct computation, and a hybrid of the
two. Tessellation is relatively easy (you intersect the polygons
making up the tessellation) and has no numerical problems, but can
be inaccurate; direct is cheap on memory, but very expensive
computationally, and can (and usually does) suffer from precision
problems within the root solver; hybrids try to blend the two.
Reference:
[Glassner:RayTracing]
----------------------------------------------------------------------
Subject: 37) How do I ray trace caustics?
There is a discussion in [Watt:Animation], but I don't know how
good it is.
It's hard to get right.
One right (but incredibly expensive) answer is:
@InProceedings{mitchell-1992-illumination,
author = "Don P. Mitchell and Pat Hanrahan",
title = "Illumination From Curved Reflectors",
year = "1992",
month = "July",
volume = "26",
booktitle = "Computer Graphics (SIGGRAPH '92 Proceedings)",
pages = "283--291",
keywords = "caustics, interval arithmetic, ray tracing",
editor = "Edwin E. Catmull",
}
A cheat:
@Article{inakage-1986-caustics,
author = "Masa Inakage",
title = "Caustics and Specular Reflection Models for
Spherical Objects and Lenses ",
pages = "379--383",
journal = "The Visual Computer",
volume = "2",
number = "6",
year = "1986",
keywords = "ray tracing effects",
}
very specialized:
@Article{yuan-1988-gemstone,
author = "Ying Yuan and Tosiyasu L. Kunii and Naota
Inamato and Lining Sun ",
title = "Gemstone Fire: Adaptive Dispersive Ray Tracing
of Polyhedrons ",
year = "1988",
month = "November",
journal = "The Visual Computer",
volume = "4",
number = "5",
pages = "259--70",
keywords = "caustics",
}
----------------------------------------------------------------------
Subject: 38) How do I quickly draw a filled triangle?
The easiest way is to render each line separately into an edge
buffer. This buffer is a structure which looks like this (in C):
struct { int xmin, xmax; } edgebuffer[YDIM];
There is one entry for each scan line on the screen, and each
entry is to be interpreted as a horizontal line to be drawn from
xmin to xmax.
Since most people who ask this question are trying to write fast
games on the PC, I'll tell you where to find code. Look at:
ftp::/ftp.uwp.edu/pub/msdos/demos/programming/source
----------------------------------------------------------------------
Subject: 39) Where can I get source for Voronoi/Delaunay triangulation?
Source code in C for general dimension convex hull and Delaunay
triangulation (qhull) is now available from:
ftp://geom.umn.edu/pub/software/qhull.tar.Z
ftp://geom.umn.edu/pub/software/qhull.sit.hqx for Macintosh
You can view the results in 3-d and 4-d with geomview from:
ftp::/geom.umn.edu:/pub/software/geomview/geomview-sgi.tar.Z - Iris
ftp::/geom.umn.edu:/pub/software/geomview/geomview-next.tar.Z - Next
Convex hull is an easy way to build convex polytopes (just list
the vertices). The algorithm also produces approximate convex
hulls. For example, we have produced the approximate convex hull
of 12,000 points in R^6, randomly distributed in the unit cube.
The distribution includes .ps files for:
Barber, C.B., Dobkin, D.P., and Huhdanpaa, H., "The Quickhull
Algorithm for Convex Hull," Technical Report GCG53, The
Geometry Center, Univ. of Minnesota, July 1993.
References:
[O' Rourke] pp. 168-204
Three-dimensional convex hull C code in Chapter 4 (p.130-60).
----------------------------------------------------------------------
Subject: 40) Where do I get source for convex hull?
See the previous question on Delaunay triangulation. The two are
the same because the Delaunay triangulation of a set of points is
the convex hull of the points lifted to a paraboloid.
References:
[O' Rourke] pp. 70-112
C code for Graham's algorithm on p.80-96.
Three-dimensional convex hull discussed in Chapter 4 (p.113-67).
C code for the incremental algorithm on p.130-60.
----------------------------------------------------------------------
Subject: 41) What is the marching cubes algorithm?
The marching cubes algorithm is used in volume rendering to
construct an isosurface from a 3D field of values.
The 2D analog would be to take an image, and for each pixel, set
it to black if the value is below some threshold, and set it to
white if it's above the threshold. Then smooth the jagged black
outlines by skinning them with lines.
The marching cubes algorithm tests the corner of each cube (or
voxel) in the scalar field as being either above or below a given
threshold. This yields a collection of boxes with classified
corners. Since there are eight corners with one of two states,
there are 256 different possible combinations for each cube.
Then, for each cube, you replace the cube with a surface that
meets the classification of the cube. For example, the following
are some 2D examples showing the cubes and their associated
surface.
- ----- + - ----- - - ----- + - ----- +
|:::' | |:::::::| |:::: | | ':::|
|:' | |:::::::| |:::: | |. ':|
| | | | |:::: | |::. |
+ ----- + + ----- + - ----- + + ----- -
The result of the marching cubes algorithm is a smooth surface
that approximates the isosurface that is constant along a given
threshold. This is useful for displaying a volume of oil in a
geological volume, for example.
----------------------------------------------------------------------
Subject: 42) What is the status of the patent on the "marching cubes" algorithm?
----------------------------------------------------------------------
Subject: 43) How do I do a hidden surface test (backface culling) with 3d points?
Just define all points of all polygons in clockwise order.
c = (x3*((z1*y2)-(y1*z2))+
(y3*((x1*z2)-(z1*x2))+
(z3*((y1*x2)-(x1*y2))+
x1,y1,z1, x2,y2,z2, x3,y3,z3 = the first three points of the
polygon.
If c is positive the polygon is visible. If c is negative the
polygon is invisible (or the other way).
----------------------------------------------------------------------
Subject: 44) How do I do a hidden surface test (backface culling) with 2d points?
c = (x1-x2)*(y3-y2)-(y1-y2)*(x3-x2)
x1,y1, x2,y2, x3,y3 = the first three points of the polygon.
If c is positive the polygon is visible. If c is negative the
polygon is invisible (or the other way).
----------------------------------------------------------------------
Subject: 45) Where can I find graph layout algorithms?
See the paper by Eades and Tamassia, "Algorithms for Drawing
Graphs: An Annotated Bibliography," Tech Rep CS-89-09, Dept. of
CS, Brown Univ, Feb. 1989.
A revised version of the annotated bibliography on graph drawing
algorithms by Giuseppe Di Battista, Peter Eades, and Roberto
Tamassia is now available from
ftp://wilma.cs.brown.edu/pub/papers/compgeo/gdbiblio.tex.Z and
ftp://wilma.cs.brown.edu/pub/papers/compgeo/gdbiblio.ps.Z
----------------------------------------------------------------------
Subject: 46) Where can I find algorithms for 2D collision detection?
----------------------------------------------------------------------
Subject: 47) Where can I find algorithms for 3D collision detection?
Check out "proxima", from Purdue, which is a C++ library for 3D
collision detection for arbitrary polyhedra. It's a nice system;
the algorithms are sophisticated, but the code is of modest size.
There's a copy in ftp://shasta.stanford.edu/pub/nagle/proxima; it
may not be the latest version.
----------------------------------------------------------------------
Subject: 48) 3D Noise functions and turbulence in Solid texturing.
See:
ftp://gondwana.ecr.mu.oz.au/pub/siggraph92_C23.shar
ftp://ftp.cis.ohio-state.edu/siggraph92/siggraph92_C23.shar
In it there are implementations of Perlin's noise and turbulence
functions, (By the man himself) as well as Lewis' sparse
convolution noise function (by D. Peachey) There is also some of
other stuff in there (Musgrave's Earth texture functions, and some
stuff on animating gases by Ebert).
----------------------------------------------------------------------
Subject: 49) How do I perform basic viewing in 3d?
We describe the shape and position of objects using numbers,
usually (x,y,z) coordinates. For example, the corners of a cube
might be {(0,0,0), (1,0,0), (1,1,0), (0,1,0), (0,0,1), (1,0,1),
(1,1,1), (0,1,1)}. A deep understanding of what we are saying with
these numbers requires mathematical study, but I will try to keep
this simple. At the least, we must understand that we have
designated some point in space as the origin--coordinates
(0,0,0)--and marked off lines in 3 mutually perpendicular
directions using equally spaced units to give us (x,y,z) values.
It might be helpful to know if we are using 1 to mean 1 foot, 1
meter, or 1 parsec; the numbers alone do not tell us.
A picture on a screen is two steps removed from the 3D world it
depicts. First, it is a 2D projection; and second, it is a finite
resolution approximation to the infinitely precise projection. I
will ignore the approximation (sampling) for now. To know what the
projection looks like, we need to know where our viewpoint is, and
where the plane of the projection is, both in the 3D world. Think
of it as looking out a window into a scene. As artists discovered
some 500 years ago, each point in the world appears to be at a
point on the window. If you move your head or look out a different
window, everything changes. When the mathematicians understood
what the artists were doing, they invented perspective geometry.
If your viewpoint is at the origin--(0,0,0)--and the window sits
parallel to the x-y plane but at z=1, projection is no more than
(x,y,z) in the world appears at (x/z,y/z,1) on the plane. Distant
points will have large z values, causing them to shrink in the
picture. That's perspective.
The trick is to take an arbitrary viewpoint and plane, and
transform the world so we have the simple viewing situation.
There are two steps: move the viewpoint to the origin, then move
the viewplane to the z=1 plane. If the viewpoint is at (vx,vy,vz),
transform every point by the translation (x,y,z) -->
(x-vx,y-vy,z-vz). This includes the viewpoint and the viewplane.
Now we need to rotate so that the z axis points straight at the
viewplane, then scale so it is 1 unit away.
After all this, we may find ourselves looking out upside- down. It
is traditional to specify some direction in the world or viewplane
as "up", and rotate so the positive y axis points that way (as
nearly as possible if it's a world vector). Finally, we have acted
so far as if the window was the entire plane instead of a limited
portal. A final shift and scale transforms coordinates in the
plane to coordinates on the screen, so that a rectangular region
of interest (our "window") in the plane fills a rectangular region
of the screen (our "canvas" if you like).
I have left out details of how you define and perform the rotation
of the viewplane, but I'm sure someone else will be happy to
supply those if there is demand. It requires knowing how to
describe a plane, and how to rotate vectors to line up. Neither is
difficult, but this is already using a lot of net space. One
further practical difficulty is the need to clip away parts of the
world behind us, so -(x,y,z) doesn't pop up at (x/z,y/z,1).
(Notice the mathematics of projection alone would allow that!) But
all the viewing transformations can be done using translation,
rotation, scale, and a final perspective divide. If a 4x4
homogeneous matrix is used, it can represent everything needed,
which saves a lot of work.
----------------------------------------------------------------------
Subject: 50) How can you contribute to this FAQ?
Send email to jdstone@ingr.com with your suggestions, possible
topics, corrections, or pointers to information. Remember, I am
not an expert on many of these topics. I'm the editor.
Here are some possible topics that may interest many of our
readers.
Clipping...
Splines
Nurbs
Image Warping/Transformation/Filtering
Anti-aliasing
Volume Rendering
Morphing (synonymous with generalized Warping)
MPEG
JPEG
Z-buffer/A-buffer/etc.
interpolation (linear, spline, fft, etc.)
Modeling tricks (fractal mountains, trees, seashells)
Surfaces
Ray Tracing
Reflection/Refraction
1) Computing the minimum bounding boxes of various geometric
elements such as circular arcs, parabolas, clothoids, splines,
etc. What is the most efficient way to do them for the
following cases:
i) The boxes are all orthogonal to the XY plane;
ii) The boxes is oriented such that the smallest area
rectangular bounding boxes are computed.
2) What is the most efficient way to tell if a polygon crosses
itself? i.e. without intersecting every edge with every edge.
----------------------------------------------------------------------
Subject: 51) Contributors. Who made this all possible.
andrewfg@aifh.ed.ac.uk (Andrew Fitzgibbon)
atae@spva.ph.ic.ac.uk (Ata Etemadi)
atsao@tkk.win.net (Anson Tsao)
barber@geom.umn.edu (Brad Barber)
bromage@mundil.cs.mu.OZ.AU (Andrew James Bromage)
cek@Princeton.EDU (Craig Kolb)
fritz@riverside.MR.Net (Fritz Lott)
hollasch@kgc.com (Steve Hollasch)
jens_alfke@powertalk.apple.com (Jens Alfke)
karsten@addx.stgt.sub.org (Karsten Weiss)
lhf@visgraf.impa.br (Luiz Henrique de Figueiredo)
orourke@cs.smith.edu (Joseph O'Rourke)
paik@mlo.dec.com (Samuel S. Paik)
sammy@icarus.smds.com (Samuel Murphy)
sanguish@digifix.com (Scott Anguish)
shoemake@graphics.cis.upenn.edu (Ken Shoemake)
slin@esri.com (Sum Lin)
spl@szechuan.ucsd.edu (Steve Lamont)
weilej@rpi.edu (Jason Weiler)
$Id: algorithms,v 1.14 1994/09/29 00:54:31 jdstone Exp $
--
----------------------------------------------------------------------
Jon Stone Intergraph Corporation
jdstone@ingr.com Boulder, CO
----------------------------------------------------------------------